Dodge Caliber SRT-4 Forums - View Single Post - Caliber SRT-4 Spark Plugs

fastyz400 · 07-16-2008, 11:46 PM

1. Unscrew the intercooler hose clamp towards the front of the car, pull it out of the boot so you can scoot the tube to the side.

2. Take off the engine cover. Just by pulling it straight up.

3. Our cars have a coil on plug design. Unplug the clip connected to each of the plugs. Pull the coil straight up. Now you can remove the spark plug.

Suggestions: Use some anti-seize on the threads of the new plugs. Before installing them. This is from past experience. The next time you go remove them, can you imagine breaking one off inside the cylinder head? Trust me, it's a stressful situation. Drill, backout tool, and hoping nothing to big falls into the cylinder or screwing up your threads in the cylinder head.

07-16-2008, 11:46 PM	#12 (permalink)
fastyz400 Senior Member Join Date: Jun 2008 Posts: 237	Change Plug Instructions 1. Unscrew the intercooler hose clamp towards the front of the car, pull it out of the boot so you can scoot the tube to the side. 2. Take off the engine cover. Just by pulling it straight up. 3. Our cars have a coil on plug design. Unplug the clip connected to each of the plugs. Pull the coil straight up. Now you can remove the spark plug. Suggestions: Use some anti-seize on the threads of the new plugs. Before installing them. This is from past experience. The next time you go remove them, can you imagine breaking one off inside the cylinder head? Trust me, it's a stressful situation. Drill, backout tool, and hoping nothing to big falls into the cylinder or screwing up your threads in the cylinder head. Last edited by fastyz400 : 07-16-2008 at 11:55 PM.